Buy a Glogo XL get a Glogo Mini for free. Use code FREEMINI at checkout.

How to connect your Glogo or Glogo XL
to your smartphone using the WLED app

1. Plug in your Glogo to a power source, please wait up to 1 minute for a Glogo to power on.

2. Open your smartphone’s WiFi settings and wait up to 1 minute for “GLOGO” to appear in your WiFi options.

3. Once it appears, connect your device to the “GLOGO” WiFi.

4. An WLED page should automatically pop up on your device, if it doesn’t appear within 1 minute please open any internet browser and in the search bar please enter “4.3.2.1” and hit enter to search and you’re caught up. 

5. There should now be two options: “WiFi SETTINGS” and “TO THE CONTROLS!” if you wish to control the lights without the use of the app or connecting to your wifi network you can choose “TO THE CONTROLS!” This will be a temporary way to control your GLOGO. If you would like to connect your GLOGO with the WLED app please press “WiFi SETTINGS”

6. This page looks like a lot but don’t worry, you only have to interact with a couple boxes. 

First, enter the name of your WiFi network into the first box that says “Network name (SSID, empty to not connect)” *THIS IS CASE SENSITIVE* meaning you have to type in your WiFi name exactly as it appears on your phone or on the side of your internet router.

7. On that same page please enter your WiFi password in the second box that says “Network Password”.

8. You’re done with this page so go all the way to the bottom and hit “Save & Connect” to save the settings. Once the “WiFi setting saved” page comes up you can press cancel and exit the page and settings app.

9. Please download the “WLED” app from the App Store/Google Play store, the icon looks like this: 

10. Once the app is downloaded, open the app and press the plus button located in the top right of the app.

11. Press “Discover Lights” at the top of the page and wait 1 minute or until it says “Discovered Lights” on top of the page.

*If the app closes unexpectedly we apologize for the inconvenience and ask that you put the url “http://Glogo.local” into any internet browser to wirelessly access your Glogo settings. This link will work on any device that is connected to your local network after your glogo has been set to the correct wifi settings*

12. Once it says “Discovered Lights” on the top of this page press the check button located at the top right corner or your screen.

Your Glogo should now be paired! 

If you have trouble with any of these steps or connecting to your Glogo in general please contact us at [email protected] or hit the button below.

*These instructions do not pertain to the Glogo Mini*

Stay Updated

Sign up to be the first to find out when we add new pre-made Glogos


    cart